A
- Abasi, Rasool Experimental investigation of carbon nanotube addition on delamination induced drilling of glass-epoxy composites [Volume 3, Issue 3, 2016, Pages 225-232]
- Adli, Ali Reza Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Akbarifar, Mehdi Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Akbari Mousavi, Seyed Ali Asghar Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
- Akherati, Seyed Reza The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2017, Pages 389-396]
- Akkaf, Mohammad Hossein Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2017, Pages 419-428]
- Alemi Ardakan, Ehsani Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Aliofkhazraei, Mahmod The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Alitavoli, Majid Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Amiri Amraei, Iraj The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2017, Pages 389-396]
- Ansari, Reza Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
- Arjangpay, Azadeh Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
- Azarafza, Reza Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2017, Pages 377-388]
B
- Babaei, Hashem Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Bagheri, Reza Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Baraheni, Mohammad Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Behravesh, Amir Hossein Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
- Bidi, Ahmad Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Biglari, Hasan Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2017, Pages 397-408]
C
- Choupani, Naghdali Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
D
- Darvizeh, Abolfazl Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Darvizeh, Abolfazl Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
- Davar, Ali Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2017, Pages 377-388]
- Divandari, Mehdi Effect of solid ring preheating and cooling conditions on bonding of Mg-Al composite produced by centrifugal casting [Volume 3, Issue 1, 2016, Pages 85-92]
- Divandari, Mehdi Defects characterization of Al-brass composite produced via centrifugal process [Volume 3, Issue 2, 2016, Pages 123-130]
- Divandari, Mehdi Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Divandari, Mehdi Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2017, Pages 343-350]
- Divandari, Mehdi Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2017, Pages 369-376]
E
- Ebrahimnezhad-Khaljiri, Hossein An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
- Ekhteraei Toussi, Hamid Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Ersad-Langroudi, Amir Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2017, Pages 419-428]
- Eshghi, Shahab Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Eslami-Farsani, Reza An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
- Eslami-Farsani, Reza An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
- Eslami-Farsani, Reza Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Es’haghi Oskui, Abuzar Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
F
- Fazlali, Babak Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
G
- Ghasemi, Ahmad Reza The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
- Ghasemi Banad kouki, Seyed Sadegh Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Gholami, Morteza Defects characterization of Al-brass composite produced via centrifugal process [Volume 3, Issue 2, 2016, Pages 123-130]
- Gholami, Morteza Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2017, Pages 343-350]
- Gholami, Morteza Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2017, Pages 369-376]
- Ghorbani, Hadi Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
- Golgoon, Abozar The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Golgoon, Ehsan The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Golzar, Mohammad Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
H
- Haghighi-Yazdi, Mojtaba Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
- Hashemi Soudmand1, Behzad Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Heidari-Rarani2, Mohammad Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Heidary, Hossein Experimental investigation of carbon nanotube addition on delamination induced drilling of glass-epoxy composites [Volume 3, Issue 3, 2016, Pages 225-232]
- Hiteh, Ehsan Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2017, Pages 343-350]
- Hosseini, Mohammad Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
- Hosseinpour, Komeil The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
K
- Kalantar, Mahdi Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Kashani1, Ali Reza Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Khalili, Seyed Mohammad Reza Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Khosravi, Hamed An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
- Khosravi, Hamed An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
- Khosravi, Hamed Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Kiani, Ali Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
L
- Liaghat, Gholamhossein Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Liaghat, Gholamhossein Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Liaghat, Gholam Hossein Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2017, Pages 311-320]
M
- Mahmoodi2, Adib Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2017, Pages 377-388]
- Maleeke, Hasan Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2017, Pages 359-368]
- Mazhari, Behzad Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2017, Pages 409-418]
- Miralami, Azam Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Mir Mohammad Hossein Ahari, Seyed Mahyar Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Moeenfard, Hamid Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2017, Pages 359-368]
- Mohammadi, Bijan Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
- Mohammadi, Bijan Mixed mode fatigue crack growth analysis of cracked aluminium panel repaired with composite patches using extended finite element method [Volume 3, Issue 4, 2017, Pages 321-332]
- Mohsenzadeh, Rasool Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Moosaie, Amin Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
- Moradi, Mohamad Hossein The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Mortezaei, Mehrzad Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2017, Pages 351-358]
- Mortezaei, Mehrzad The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2017, Pages 389-396]
- Mosallaee Pour, Masoud Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Mosalmani2, Reza Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
N
- Naghdinasab, Mohsen Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Nikzamir, Mahdieh Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2017, Pages 351-358]
- Nooraeefar, Vahid Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
P
- Panahi Kalus, Hamed Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
- Pol, Mohammad Hosein Experimental investigation of carbon nanotube addition on delamination induced drilling of glass-epoxy composites [Volume 3, Issue 3, 2016, Pages 225-232]
R
- Rafiee, Roham Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2017, Pages 409-418]
- Rahimi, Gholamhossein Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Rahimi, Gholamhossein Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Rahimi, Gholam Hossein Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2017, Pages 333-342]
- Rahimi, Gholam Hossein Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2017, Pages 311-320]
- Rahimi Bafrani, Iman Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Rahimi Sharbaf, Hamed Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2017, Pages 311-320]
- Rajabi, Hamed Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
S
- Safari, Mojtaba Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2017, Pages 397-408]
- Salehi, Mohammad Taghi Defects characterization of Al-brass composite produced via centrifugal process [Volume 3, Issue 2, 2016, Pages 123-130]
- Salehi, Mohammad Taghi Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2017, Pages 369-376]
- Sari, Amin Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Sarvari, Morteza Effect of solid ring preheating and cooling conditions on bonding of Mg-Al composite produced by centrifugal casting [Volume 3, Issue 1, 2016, Pages 85-92]
- Sedigh, Yaser Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Shariati-Nia, Mostafa Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Shelesh-Nezhad, Karim Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Shelesh-Nezhad, Karim Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Shokrieh, Mahmood Mehrdad Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Shokrieh, Mahmood Mehrdad Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
T
- Tahani, Vahid Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2017, Pages 333-342]
- Tahaye Abadi, Mohammad Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
- Taheri-Behrooz, Fathollah Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
- Toorani, Mansor The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Torabi, Keivan Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
Y
- Yarmohammad Tooski, Mehdi Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
Z
- Zandi Baghche Maryam, Abbas Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
- Zeinedini, Afshin Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]